Inetcam Mobile Gateway 用户手册
Draft version 1.7
3
Inetcam® and iMViewer™ are the property of Inetcam, Inc.
Introduction
The Inetcam
®
Mobile Gateway™ video server is designed to take video feeds and make them
available to cell phones running the iMViewer™ application. The unit can receive analog camera
feeds directly into the unit, or can receive loop through from a DVR or time-lapse VCR unit:
virtually any analog feed may be used as a video source on the Mobile Gateway™ video server.
feeds directly into the unit, or can receive loop through from a DVR or time-lapse VCR unit:
virtually any analog feed may be used as a video source on the Mobile Gateway™ video server.
Because the Mobile Gateway™ video server is designed for Internet viewing through a cell
phone, it requires that the Mobile Gateway™ video server be available on the Internet. This may
require firewall or router configuration. The router or firewall manual/manufacturer will have
instructions on how to view a web server or network camera that is behind such a device.
phone, it requires that the Mobile Gateway™ video server be available on the Internet. This may
require firewall or router configuration. The router or firewall manual/manufacturer will have
instructions on how to view a web server or network camera that is behind such a device.
At no time should the Mobile Gateway™ video server interfere with normal security system
operation. If an issue occurs, physical connections to both units should be checked to make sure
they are engaged snugly. If the issue persists, disconnect the Mobile Gateway™ video server and
contact Inetcam
operation. If an issue occurs, physical connections to both units should be checked to make sure
they are engaged snugly. If the issue persists, disconnect the Mobile Gateway™ video server and
contact Inetcam
®
Technical Support.
Feedback, comments and questions are always welcome on this unit. Please contact your
Inetcam
Inetcam
®
sales representative, or email
channelsupport@inetcam.com
.
System Contents
1 CD Containing: Mobile Gateway™ Finder utility
1 Mobile Gateway™ video server
4 RCA cables (optional)
Mobile Gateway™ User’s Guide
iMViewer™ User’s Guide
System Requirements
Mobile Gateway™ is a self-contained unit that should be administered remotely from a browser.
The administration screens require:
The administration screens require:
• An Internet and network connection able to access the Mobile Gateway™ video server
• A PC with a network connection and a CD-ROM (used to configure the Mobile
Gateway™ video server)
• A web browser such as Internet Explorer 5.x and 6.x, and Netscape 6.x and 7.x. (For
best results, JavaScript must be activated in the browser)
• iMViewer™ installed and registered on a cellular phone (a list of compatible phones is
available at
www.inetcam.com
)
Mobile Gateway™ System Default Settings
Mobile Gateway™ video servers default to the following state:
• All cameras configured and “live” – cameras are scheduled “always on”
• A single administrative account: username -- “Admin”, password -- “password”
• Require authentication to access video is turned off, allowing all viewers to see all
• A single administrative account: username -- “Admin”, password -- “password”
• Require authentication to access video is turned off, allowing all viewers to see all
cameras
• The Mobile Gateway™ video server default port is 80
• Each Mobile Gateway™ unit supports up to 15 concurrent viewers (*not a configurable
• Each Mobile Gateway™ unit supports up to 15 concurrent viewers (*not a configurable
setting)
• Each Mobile Gateway™ video server has a unique and random host name