Motorola SBV5220 用户手册

Installation

Troubleshooting

Glossary

   

Before you begin the installation, check that you received the following items with your VoIP cable modem:

You will need 75-ohm 

with 

 to connect your VoIP cable modem to the nearest 

cable outlet. If a TV is connected to the cable outlet, you may need a 5–900 MHz RF 

 and a total of three 

coaxial cables to connect both the TV and the VoIP cable modem. The coaxial cable and RF splitter are available 
at consumer electronics stores. To connect your VoIP cable modem to an Ethernet hub, see the network 
description in 

 on page 35. Check the documentation provided with your hub.

Connects to the AC power outlet

Connects to the 

 port

Connects to the 

 port

Connects the telephone to the cable system to provide telephone service

SBV5220 
VoIP Cable 
Modem 
CD-ROM

Contains the User Guide and USB drivers

Provides standby power for your SBV5220 (one each). The SBV5220 has 
the capability to accommodate two standby batteries. For additional standby 
batteries, contact your service provider.

This product is for indoor use only. Do not route the USB, Ethernet, or telephone cables outside of the 
building. Exposure of the cables to lightning could create a safety hazard and damage the product.