Motorola SL4010 用户手册
Advanced Features
English
71
IP Site Connect
This feature allows your radio to extend communication beyond
the reach of a single repeater site by operating on multiple
repeater sites connected together via an Internet Protocol (IP)
network.
the reach of a single repeater site by operating on multiple
repeater sites connected together via an Internet Protocol (IP)
network.
When the radio moves out of range from one site and into the
range of another, it connects to the new site's base station to
send or receive calls/data transmissions. Depending on your
settings, this is done automatically or manually.
range of another, it connects to the new site's base station to
send or receive calls/data transmissions. Depending on your
settings, this is done automatically or manually.
If the radio is set to do this automatically, it scans through all
available sites when the signal from the current site is weak or
when the radio is unable to detect any signal from the current
site. It then locks on to the base station with the strongest
Received Signal Strength Indicator (RSSI) value.
available sites when the signal from the current site is weak or
when the radio is unable to detect any signal from the current
site. It then locks on to the base station with the strongest
Received Signal Strength Indicator (RSSI) value.
In a manual site search, the radio searches for the next site in
the roam list that is currently in range (but which may not have
the strongest signal) and locks on to it.
the roam list that is currently in range (but which may not have
the strongest signal) and locks on to it.
NOTE: Each channel can only have either Scan or Roam
enabled, not both at the same time.
Channels with this feature enabled can be added to a particular
roam list. The radio searches the channel(s) in the Members list
during the automatic roam operation to locate the best site.
roam list. The radio searches the channel(s) in the Members list
during the automatic roam operation to locate the best site.
A Members list supports a maximum of 16 channels (including
the Selected Channel).
the Selected Channel).
NOTE: You cannot manually add or delete an entry to the
Members list. Check with your dealer or system
administrator for more information.
administrator for more information.
Locking Automatic Site Search
When the radio is actively searching for a new site:
Procedure:
Press the programmed Site Lock On/Off button.
Press the programmed Site Lock On/Off button.
1
A tone sounds and the display shows Site Locked.
2
The LED turns off and the display shows the channel alias.
OR
Procedure:
Use the menu.
Use the menu.
1
c
to access the menu.
2
^
or
v
to Utilities and press
c
to select.
3
^
or
v
to Radio Settings and press
c
to select.
4
^
or
v
to Site Roaming and press
c
to select.
5
^
or
v
to Lock Site State.
6
Press
c
to lock site. The display shows 9 beside Enabled.
OR
Press
Press
c
to unlock site. The 9 disappears from beside
EMEA-ANZ.book Page 71 Monday, March 19, 2012 2:32 PM