Motorola SL4010 用户手册

If enabled, this feature allows you to access your radio via 
password upon powering up.

Procedure:
Power up the radio.

You hear a continuous tone. 

Enter your current four-digit password with the radio’s 
keypad. The second line of the display shows ●●●●. Press 

c 

to proceed.

OR
Enter your current four-digit password. Press 

^ 

or 

v

 to edit 

each digit’s numeric value. Each digit changes to ●. Press 

>

 

to move to next digit. Press 

c

 to confirm your selection. 

You hear a positive indicator tone for every digit pressed. 
Press 

<

 to remove the last ● on the display. You hear a 

negative indicator tone, if you press 

<

 when the second line 

of the display is empty, or if you press more than four digits.

If the password is correct:
Your radio proceeds to power up. See Powering Up the 
Radio on page 4.
OR

If the password is incorrect:
The display shows Wrong Password. Repeat Step 2. 
Password less than four digits is incorrect.
OR
After the third incorrect password, the display shows 
Wrong Password and then, shows Radio Locked. A tone 
sounds and the LED double blinks yellow.

NOTE: The radio is unable to receive any call, including 

emergency calls, in locked state.

Procedure:
Wait for 15 minutes. Repeat Steps 1 to 3 in Accessing the 
Radio from Password on page 76.
OR
Power up the radio, if you have powered down the radio during 
locked state:

A tone sounds and the LED double blinks yellow. The 
display shows Radio Locked.

Wait for 15 minutes. Repeat Accessing the Radio from 
Password on page 76.

EMEA-ANZ.book  Page 76  Monday, March 19, 2012  2:32 PM