Motorola WMC6300 用户手册

Care should be taken when disconnecting an antenna from the WMC6300 card.  Applying force 
in any direction other than parallel to the card may result in excess pressure being applied to the 
connection between the WMC6300 connector and the board, which could crack or otherwise 
damage a solder joint. 

When disconnecting a pigtail antenna from the WMC6300, additional attention must be taken 
not to damage the card, connector, or cable. As shown in the following diagram, pull straight out 
at the connector to avoid damaging the card, connector or cable. 

Complete the following procedure to install the Magnetic Mount Antenna on the rooftop of a 
vehicle.  The length of the Antenna cable is approximately 12 feet. 

 

1.  Attach the Magnetic Antenna to the metal rooftop of the vehicle so that the antenna is in 

a vertical orientation.   

ATTENTION: The base of the antenna contains a powerful magnet that secures the antenna to 
the rooftop.  Use care when attaching the antenna. 

2.  Route the remaining 12 foot cable as required, to arrive at the Host Computer.  

 

When using the WMC6300 in a PDA, keep antenna at a 
minimum separation distance of 1.5cm from all persons. 

 

3.  Insert the Antenna Cable Connector into the WMC6300 antenna port as shown in 

 

NOTE:  The connector will snap into place when fully inserted. 

 

 

20