Motorola Communications Gateway 用户手册
48
Communications Gateway User Guide
Replacing the Battery, continued
Introduction
Before You Begin
Installation & Configuration
FAQ
Troubleshooting
Glossary
License
X
Home
Print
Exit
10
On a slight angle, gently slide the top-right corner of the battery under the battery
hook as shown at left.
hook as shown at left.
While you rotate the battery into position, to avoid pinching the wires between the
battery and the base, be sure the battery wires are not under the battery. Pinching
the wires between the battery and the base:
battery and the base, be sure the battery wires are not under the battery. Pinching
the wires between the battery and the base:
■
May damage the wires
■
Will cause the battery to seat incorrectly
11
Rotate the battery into position under the battery snaps as shown by the arrow at left.
When the battery is fully seated, the snaps engage the battery base.
When the battery is fully seated, the snaps engage the battery base.
12
Carefully replace the battery compartment cover. Do not force the cover closed. If
the battery compartment cover does not close easily, check that:
the battery compartment cover does not close easily, check that:
■
The power cord is positioned correctly in its opening
■
Then rotate the battery
under the snaps
First, slide the battery
under the hook