Motorola W24 用户手册
A/D Converter Interface
26
Module Hardware Description
May 31, 2008
A/D Converter Interface
W24 incorporates Analog to Digital Converter interface intended to support G24 ADC interface,
in stacked configuration. The interface consists of the following pins (see
in stacked configuration. The interface consists of the following pins (see
The above signals are routed from 70-pin host connector to G24 70-pin connector via W24. They
are not internally connected to W24 circuits. If the W24 will be used as stand alone only, the
above pins should be left open.
are not internally connected to W24 circuits. If the W24 will be used as stand alone only, the
above pins should be left open.
For more details on implementing a ADC interface for use with G24, please refer to the
"Motorola G24 Developer's Guide - Module Hardware Description" PN 6889192V27
"Motorola G24 Developer's Guide - Module Hardware Description" PN 6889192V27
Table 2-10: ADC Interface Signals
Pin #
Pin Name
Description
37
ADC1
General purpose A/D
43
ADC2
General purpose A/D
47
ADC3
General purpose A/D