Motorola V.34-SDC 用户手册

4-2 Configuring the Modem

This chapter explains how to configure the modem, in conjunction with Chapter 3, 
Getting Started. Read Chapter 3 before continuing. Then select an option:

• If the application requires a communications software package, read the 

section, “Communications Software Package Operating Notes”.

• If you have previously installed the 326X in another application, the section 

“Preparing for Operation” explains how to reinitialize the modem memory so it 
can be installed in a new application.

• To configure quickly, the 326X Series Modem offers four preconfigured 

option sets. Each option set is tailored for an application and stored in the 
modem’s nonvolatile memory. Refer to the section “Configuration Option 
Sets” to determine if an option set is appropriate for your application.

• The following two sections provide examples of common 326X applications 

and tell you how to configure the modem for each application. These 
sections will help you to configure the modem quickly.

• If you are unfamiliar with the AT command set or the modem front panel, 

refer to the section “Remote Access Reset”, later in this chapter. Once this is 
done, you can use a remote modem to configure the local modem.

If the modem is part of a network and you have a Network Management System 
(NMS) installed, consult your network manager for configuration information.

This section provides information for configuring the 326X Series Modem to work 
with communications software packages.

Option Set 1 (the modem’s factory default setting) is for use with communications 
software in asynchronous dial applications, where the AT ACU originates calls. 

Refer also to:

• “Operating Notes” at the end of this section

• “Configuration Option Sets”