MRV Communications TS700/G 用户手册

M R V   C o m m u n i c a t i o n s ,   I n c .   –   I n s t a l l a t i o n   M a n u a l  

34 

 

 

The JITK-L tool kit includes the work tools required for opening and closing 
nuts and screws of the TereScope for optimal installation. It is recommended 

that these tools be used. MRV supplies this tool kit with each TereScope head. 
In addition to the tool kit, screws are supplied for mounting the JMP-L on a 

pedestal that is supplied by MRV as an option. 
 

 

 

 

The TereScope Head, Aiming Head, and JMP-L are shipped connected to one 
another. Before mounting, in order to make installation on the mounting 

surface easier, the JMP-L must first be detached and connected to the fixation 
surface. Next, the TereScope Head and Aiming Head can be mounted. 

To detach the JMP-L, screws ‘B’  should be loosened and screws ‘F1’ and ‘G1’ 
only should be removed. Do not remove the ‘G2’ screws !  
 
 

 

 

 
 

 
 

 
 

 
 

 
 

 
 

 
If the TereScope head is to be detached (e.g., for servicing, but we recommend 

to send the entire unit TS + Aiming head to the manufactory), remove the 
four ‘G2’ and ‘F2’ screws (Fig 5.11). 
 

JITK: Installer Tool 

Kit 

G2 (x2) 

G1 

F1 (x2) 

B