Intel LH500 用户手册

下载
页码 78
 
14
Chapter 2.  Hardware Installation 
2.1  Mounting the motherboard 
  
!INSTALLATION WARNING! 
Use Caution When Installing the ServerBoard into the System Chassis 
The components underneath the PS/2 Mouse/Keyboard connectors around the mounting hole are very 
FRAGILE and can be knocked off of their soldered positions, resulting in IRREPARABLE DAMAGE 
during installation when sliding the board into a system chassis. 
Gently install the ServerBoard into the chassis, and use a Mylar Sheet to cover and protect the underside of 
the ServerBoard during installation. Take care NOT to scrape the bottom of the ServerBoard on the chassis 
stand-offs and mounting holes. 
These components are necessary for many different operations, including the Mouse and the Keyboard. If 
you damage any of these chips, one of the symptoms is that the ServerBoard will NOT respond to key 
strokes through the PS/2 port and the ServerBoard will have to be replaced. Other symptoms include the 
loss of response or functionality in any of the rear I/O ports. Contact your authorized dealer for more 
information. 
The Damage noted here in this WARNING may require the ServerBoard to be replaced.  Due to the Nature 
of the Damage, this may be considered Out-of-Warranty Damage. Make certain that ALL documented 
procedures are followed correctly.