Intel LH500 用户手册

3.5.6 IPMI Sub Menu

The IPMI Sub Menu looks like the following:

PhoenixBIOS Setup Utility

Advanced

IPMI

Item Specific Help

BMC/Scorpio Configuration
   IP Address                               [192.168.254.001]
   Subnet Mask                            [255.255.255.000]
   Default Gateway                      [192.168.254.254]

IPMI Specification Version          (Unknown)
   BMC Firmware Version          (Unknown)
System Event Logging                 [Enabled]
Existing Event Log number         0
Remaining Event Log number     (Unknown)
Event Log Control
   SYS Firmware Progress          [Disabled]
   BIOS POST Errors                [Enabled]
BIOS POST Watchdog           [Disabled]
OS boot Watchdog                      [Disabled]
   Timer for loading OS (min)    [10]
   Time out action                      [No Action]
Date Format to show                 [MM DD YYYY]
Date Separator                             [ . ]

Display IP Address

F1 Help

↑↓ Select Item -/+ Change Values F9 Setup Defaults

ESC Exit

←→Select Menu Enter Select►Sub-Menu F10 Save and Exit

The following table shows the items that you can customize on the IPMI sub-menu page:

Item Options

Description

IP Address
Subnet Mask
Default Gateway

No options.

Display/Set IP Address, Subnet
Mask, and Gateway.

System Event Logging

Disabled
Enabled

Enable/Disable IPMI event
logging. Disabling will still log
events received via the system
interface.

SYS Firmware Progress

Disabled
Enabled

Enabling this selection will log
POST Progress.

BIOS POST Errors

Disabled
Enabled

Enabling this selection will log
POST errors.

BIOS POST Watchdog

Disabled
Enabled

Enabling this selection will
enable POST watchdog.

OS boot Watchdog

Disabled
Enabled

Enabling this selection will
enable OS Boot watchdog.

Timer for loading OS (min)

1~100

Timer value for watchdog timer.

Time out action

No Action
Reset
Power Off
Power Cycle

Determines what action to take
if OS fails to boot.