Motorola MPMC101 用户手册
Installing the PCI SCSI-2 Adapter
2-3
2
The PCI and PMC Adapters reside in different locations within the
host systemÕs hardware. The installation instructions for each type
of adapter (motherboard and mezzanine) are discussed in separate
sections within this chapter. If you are installing a PCI SCSI-2
Adapter, please refer to the following section. The installation
instructions for the PMC SCSI-2 Adapter begin on page
host systemÕs hardware. The installation instructions for each type
of adapter (motherboard and mezzanine) are discussed in separate
sections within this chapter. If you are installing a PCI SCSI-2
Adapter, please refer to the following section. The installation
instructions for the PMC SCSI-2 Adapter begin on page
.
Installing the PCI SCSI-2 Adapter
!
Warning
Your computer operates with voltages that can be lethal.
Before you remove the computer cover, carefully review
the steps in this procedure and observe all cautions and
warnings to protect yourself and to prevent damage to
the system.
Before you remove the computer cover, carefully review
the steps in this procedure and observe all cautions and
warnings to protect yourself and to prevent damage to
the system.
To install the PCI Adapter in a host expansion slot:
1. Turn off the computerÕs power switch and unplug the unit
from its power source. Disconnect all cables that are
connected to the main system unit.
connected to the main system unit.
2. Use only insulated or nonconductive tools.
3. Remove the computerÕs cover according to the
manufacturerÕs instructions and locate a suitable PCI
expansion slot.
expansion slot.