Motorola CP200XLS 用户手册

A list of Motorola authorized batteries and 
battery chargers appears on page 56. The 
listed chargers will charge only Motorola 
authorized batteries. Other batteries may not 
charge.

Do not use the slow charger if using lithium-
ion (Li-Ion) or nickel-metal hydride (NiMH) 
batteries. The slow charger is for a nickel-
cadmium (NiCd) battery only.

Blinking Yellow

Battery in charger but 
waiting to be charged. The 
battery temperature may be 
too hot or too cold. The 
voltage may be lower than 
the predetermined threshold 
level for charging.

Blinking Green

b

Battery 90% (or more) 
charged. Trickle charging.

Green

Battery fully charged.

a. Remove the battery from the charger and 

use a pencil eraser to clean the three metal 
contacts at the back of the battery. Place the 
battery back into the charger. If the LED 
indicator continues to blink red, replace the 
battery.

b. A standard battery may require 90 minutes 

to charge to 90% capacity. Even though new 
batteries might prematurely indicate a full 
charge (steady green LED), charge the 
battery for 14 to 16 hours prior to initial use 
for best performance.

1

Turn the radio OFF.

2

Place the battery, with or without the radio, in 
the charger pocket. 

•

The charger LED indicates the charging 
progress.

No LED Indication

Battery inserted incorrectly 
or battery not detected.

Steady Red

Battery is in over night 
charge mode. The battery is 
fully charged after 11 hours.