Motorola 6806800C44B 用户手册
Availability Service Programmer’s Reference (6806800C44B)
Management Interface
admin reset
30
Example
Example Commands:
set safSg=SG_NCS_DIRECTORS adminstate locked
The previous command will lock the Service Group NCS DIRECTORS.
set safNode=PL_2_6 adminstate unlocked
The previous command will unlock the node PL_2_6.
set safSu=SuT_NCS_Payload adminstate shuttingdown
The previous command will shut down the Service Unit NCS_Payload
2.3.2
admin reset
Description
This command resets nodes at the location mentioned within.
AvSv supports two types of resets: soft and hard. With soft resets, applications on a node are
first failed over, then gracefully shut down, and then an HPI command to gracefully reset the
processor is issued.
first failed over, then gracefully shut down, and then an HPI command to gracefully reset the
processor is issued.
Soft resets are not allowed on active system manager hosts.
With hard resets, an HPI command to abruptly reset the processor is issued.
Synopsis
reset /Shelf-id/Slot-id/Subslot-id/
operation softreset | hardreset
/Shelf-Type/Blade-Type/Blade-Type
Parameters
Shelf-id
ID of the chassis.
Slot-id
ID of the physical slot.
Subslot-id
ID of the subslot. This field is optional. Users have to provide the ID only if there is any entity at
level 3.
level 3.
softreset