Multi-Tech Systems MTA128NT 用户手册
Configuration Utilities
MTA128ST/NT
17
Configuring your TA
If you use Windows 98/Me/NT, perform the following procedure using the Configuration Utility provided on
your system CD. If you are using another operating system, you can configure the TA using the firmware-
based configuration utility or AT commands. Procedures for using the firmware-based configuration utility
and AT commands are described in Appendix E.
your system CD. If you are using another operating system, you can configure the TA using the firmware-
based configuration utility or AT commands. Procedures for using the firmware-based configuration utility
and AT commands are described in Appendix E.
Before you begin, verify your switch type and TEI with your local ISDN provider and have that information
readily available
readily available
1.
When installing from CD, insert the MTA128ST/NT System CD into your CD ROM drive. When the
MTA128ST/NT Terminal Adapter AutoRun screen is displayed, click on the Config Utility icon. Follow
the on screen directions to load the Configuration Utility onto your pc.
the on screen directions to load the Configuration Utility onto your pc.
2.
When the Configuration Utility is loaded onto your pc, click Start>Programs>ISDNTA Config Utility.
The Welcome screen is displayed
Do you want the wizard to search for your ISDN TA? with the Yes option enabled. Click Next to
continue.