Acer 08P4100 用户手册

Requirements

1-2

PCI Disk Array Controller Drivers Manual

Use the following method to obtain drivers for SCO OpenSever 5.0.5, 
UnixWare 7.x, 2.1.2 / 2.1.3, or Solaris 7 for x86:

• Insert the CD-ROM into a system running Windows 95 / 98, Windows 

NT, or Windows 2000, then click on “Create Software Diskettes” from 
the RAID Management Software Installation menu. See Appendix A 
for details. 

In order to use any of the supported distributions of Linux, you will need to 
download the driver files from the appropriate web site (see Chapter 8 
“Linux”).

It is assumed that the hardware installation, the system configuration, and the 
disk array controller configuration are properly completed. If they are not, 
please refer to the appropriate Mylex disk array controller hardware 
installation guide and to the RAID EzAssist Configuration Utility User 
Reference Guide or RAID EzAssist Configuration Utility Quick 
Configuration Guide. Complete the required procedures described in those 
manuals before proceeding with installation of drivers discussed herein.

The person who will be performing the installation should have Supervisor 
or Administrator rights for the system onto which these software drivers will 
be installed.

It may also be necessary to prepare a DOS bootable floppy disk to be able to 
perform certain procedures described in this manual. Before starting, be sure 
to read through all applicable instructions to determine the specific 
requirements for each operating system to be supported.