Acer 08P4100 用户手册

Installing the Mylex Disk Array Controller as the Primary NetWare 4.2 Controller

2-4

PCI Disk Array Controller Drivers Manual

1. The appropriate drivers should be loaded before trying to access the 

non-disk devices. For example, to use NetWare's Sbackup utility, do the 
following:

: load mdac.ham

: load nwtape.cdm

: load tsa410

: load tapedai

: scan for new devices

: load sbackup

Except for the mdac.ham driver, .CDM or .NLM files are supplied by 
Novell. Refer to the Novell documentation for instructions on running 
Sbackup.

2. Load the following drivers to use a CD-ROM under NetWare 4.2 (the 

NLMs aspicd and cdrom are supplied by Novell):

: load mdac.ham

: load scsicd.cdm

: load cdrom.nlm

: cd mount [volume name]

After the CD-ROM is mounted, the volume on the CD-ROM can be 
mapped from any workstation and accessed.

If NetWare 4.2 is already installed and you wish to add a Mylex Disk Array 
Controller later, the controller will be a secondary (non-bootable) controller. 
After installing the controller hardware and configuring a disk array, follow 
the procedure below to add the necessary controller drivers.

1. With NetWare Server 4.2 loaded and running, load the NetWare 

program INSTALL.NLM by typing the following at the console 
prompt:

and press <Enter>.

2. Choose “Driver Options” in the Installation Options menu.