Allied Telesis AT-2973T 用户手册

Chapter 4: Installing the Monolithic Software Driver

50

By default, the monolithic driver is not included in the boot.wim and 
install.wim files that come with the Windows Vista, Windows Server 2008, 
and Windows Server 2008 R2 Operating Systems. Microsoft's Windows 
Automated Installation Kit (AIK) allows you to modify the default boot.wim 
and install.wim files and create WinPE 2.0 images to include the 
NetXtreme II monolithic driver in the Windows Vista, Windows Server 
2008, and Windows Server 2008 R2 installation. 

To insert Broadcom's NetXtreme II monolithic driver in a WinPE 2.0 image 
(for Windows Vista, Windows Server 2008, and Windows Server 2008 
R2), download AIK from www.microsoft.com/downloads/
Search.aspx?displaylang=en, type in “automated install kit” in the Search 
field. Then install AIK. 

After installing AIK, copy the latest monolithic driver to a directory on the 
local hard drive of the system you installed the AIK. Follow the procedure 
below to insert the monolithic driver into a WinPE 2.0 boot image. 

The directory structure c:\VistaPEx86 is used throughout this 
procedure. 

To insert the monolithic driver into a WinPE 2.0 boot image, do the 
following:

1. Download the monolithic driver files, b06nd.inf and b06nd.sys.

Go to the Allied Telesis website at www.alliedtelesis.com/support/
software. After you have accessed this website, enter the model 
number in the Search by Product Name box and then click Find to 
view the current list of files. 

2. From All Programs, open Windows AIK and select Windows PE 

Tools Command prompt.

3. At the command prompt, run the copype.cmd script. The script 

requires two arguments: hardware architecture and destination 
location. The command syntax is:

copype.cmd <arch> <destination>

For example: copype x86 c:\VistaPEx86