Acer AcceleRAID 352 用户手册

Manual No. 775051

3-1

This chapter describes the AcceleRAID 352 RAID controller start-up 
procedures and messages produced by the BIOS during start-up or re-boot. 
This chapter also explains three BIOS options that are available for 
configuring controller operation.

After physically installing the controller and connecting the cabling, do the 
following steps if you need to set or modify the BIOS options (see “Setting 
BIOS Options” on page 3-2 for details):

1. Power on the computer.

2. Watch the messages on the screen for the following prompt to be 

displayed:

Press <ALT-M> for BIOS options

3. Press Alt–M to get into the BIOS Options menu.

4. The BIOS Options menu provides the following items to choose from:

5. To select any of the items in the menu, highlight the selection with the 

Up Arrow or Down Arrow. Press Enter to toggle any of the 3 items.

☛

BIOS must be enabled to toggle the CD-ROM boot 
and the Drive geometry parameters.