ADC Broadband System 用户手册

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

2-170
© 2000, ADC Telecommunications, Inc.

This procedure is used to download the MPU software into an MPU module. This

involves the transfer of two files. It requires 12 to 17 minutes to transfer both files, depending on
the type of host computer and the communication program used.

Caution: You must use a Version 5.X module with the Version 5.3 software.

Caution: Perform a configuration upload first. Refer to DLP-554 (Configuration Data
Upload Command) for more information.

1. Log on to the Craft Interface.

 Craft Interface System Logon

2. Select System Maintenance from the Main Menu using the arrow keys. Press Enter or

3. At the System Maintenance menu, select Upload/Download Commands. Press Enter or

4. At the Upload/Download Commands Menu, select Execute Software Download. Press

Enter or Return. The following message displays:

Preparing to execute new software download...

Are You Sure? (y/n)

5. Begin the software download process by pressing Y for yes; or cancel the download

process by pressing N for no.

6. If you press Y, all indicators on the APU will be on and the MPU status indicator will flash

yellow/green. The following message displays:

Download In Progress

Craft Logged Out

Please Wait

7. Start the program used to transfer the MPU application software from the host computer to

the MPU.

 You must use the XMODEM protocol to transfer files.