ADC Broadband System 用户手册

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance

© 2000, ADC Telecommunications, Inc.

 This TAD describes the commands used to operate the Soneplex Loop Extender

through a terminal using Transaction Language 1 (TL1). All operations are performed at a local
and/or remote terminal using an EIA-232 interface. For additional information on TL1 commands,
refer to the Soneplex TL1 Interface Specification Manual, listed under Related Publications at the
beginning of this manual, for more information.

 The TL1 interface is case-insensitive. All input commands are mapped to

uppercase except for TID and CTAG. Size of input commands is limited to 512 bytes.

The following notational conventions are used throughout this TAD:

• cr

— Carriage return

• lf

— Line feed

• ^

— Blank space

• YY-MM-DD —

Year-Month-Day

• HH:MM:SS —

Hour:Minute:Second

• ...

— Indicates zero or more repetitions of expression contained in brackets

• [ ]

— One or more parameters contained in brackets are optional

• { x }— Selection of one and only one of the listed parameters is allowed

• < > — Indicate names of parameters that will be replaced by parameter

values in actual TL1 transactions

Any user request is considered a command. Commands generally consist of five blocks:

<command block>:<routing block>:<access block>:<correlation block>:<data block(s)>;

The command block consists of commands, verbs, and modifiers separated by hyphens.

<command verb> - <modifier>[-<modifier>]

For example: The command block OPR-LPBK contains the command verb OPR (OPeRate) and
the modifier LPBK (LooPBacK) to provide for the loopback function. The command block SET-
ATTR-T1 contains the command verb SET, the modifier ATTR (ATTRibute), and the modifier
T1 to provide the mechanism for setting attributes of a T1 circuit.