Cisco Systems WRT110 用户手册

下载
页码 48
Chapter 3
Advanced Configuration
23
RangePlus Wireless Router
Enabled 
Select  Enabled  to  enable  port  forwarding  for 
the applications you have defined.
Click Save Settings to apply your changes, or click Cancel 
Changes to cancel your changes.
Applications  &  Gaming  >  Port  Range 
Triggering
The  Port  Range  Triggering  screen  allows  the  Router  to 
watch  outgoing  data  for  specific  port  numbers.  The  IP 
address of the computer that sends the matching data is 
remembered by the Router, so that when the requested 
data returns through the Router, the data is pulled back 
to  the  proper  computer  by  way  of  IP  address  and  port 
mapping rules.
Applications and Gaming > Port Range Triggering
Port Range Triggering
Application  Name 
Enter  the  application  name  of  the 
trigger.
Triggered Range 
For each application, enter the starting 
and ending port numbers of the triggered port number 
range. Check with the Internet application documentation 
for the port number(s) needed.
Forwarded Range 
For each application, enter the starting 
and ending port numbers of the forwarded port number 
range. Check with the Internet application documentation 
for the port number(s) needed.
Enabled 
Select Enabled to enable port triggering for the 
applications you have defined.
Click Save Settings to apply your changes, or click Cancel 
Changes to cancel your changes.
Applications and Gaming > DMZ
The  DMZ  feature  allows  one  network  computer  to  be 
exposed  to  the  Internet  for  use  of  a  special-purpose 
service  such  as  Internet  gaming  or  videoconferencing. 
DMZ hosting forwards all the ports at the same time to 
one PC. The Port Range Forwarding feature is more secure 
because it only opens the ports you want to have opened, 
while DMZ hosting opens all the ports of one computer, 
exposing the computer to the Internet. 
Applications and Gaming > DMZ
DMZ
Any PC whose port is being forwarded must have its DHCP 
client function disabled and should have a new static IP 
address assigned to it because its IP address may change 
when using the DHCP function.
Enabled/Disabled 
To  disable  DMZ  hosting,  select 
Disabled.  To  expose  one  PC,  select  Enabled.  Then 
configure the following settings:
Source IP Address 
If you want any IP address to be the 
source, select Any IP Address. If you want to specify an IP 
address or range of IP addresses as the designated source, 
select and complete the IP address range fields.
Destination 
If  you  want  to  specify  the  DMZ  host  by  IP 
address,  select  IP  Address  and  enter  the  IP  address  in 
the  field  provided.  If  you  want  to  specify  the  DMZ  host 
by MAC address, select MAC Address and enter the MAC 
address in the field provided. To retrieve this information, 
click DHCP Client Table.
DMZ > DHCP Client Table
DHCP Client Table
The  DHCP  Client  Table  lists  computers  and  other 
devices that have been assigned IP addresses by the 
Router. The list can be sorted by Client Name, Interface, 
IP  Address,  MAC  Address,  and  Expired  Time  (how