Cisco Systems E1500 用户手册

Advanced Configuration

Linksys E-Series

Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to 
connections in Europe  If your PPTP connection supports DHCP or a dynamic IP 
address, then select obtain an IP Address Automatically  If you are required 
to use a fixed IP address to connect to the Internet, then select Specify an IP 
Address and configure the options below 

Layer  2  Tunneling  Protocol  (L2TP)  is  a  service  that  generally  applies  to 
connections in Israel 

Telstra Cable is a service that generally applies to connections in Australia 

The  Connect  on  Demand  and  Keep  Alive  options  let  you  choose  whether 
the router connects to the Internet only as needed (useful if your ISP charges 
for  connect  time),  or  if  the  router  should  always  be  connected   Select  the 
appropriate option 

The basic settings for wireless networking are set on this screen 

After you set up the wireless network(s), set up the wireless security 
settings 

Select the wireless standards your network will support 

 

•

If you have Wireless-N (2 4 GHz), Wireless-G, and Wireless-B devices 

in your network, keep the default, Mixed 

 •

If you have both Wireless-B and Wireless-G (2 4 GHz) 

devices in your network, select Wireless-B/G only 

 •

If  you  have  only  Wireless-B  devices,  select  Wireless-B 

only  

 •

If  you  have  only  Wireless-G  devices,  select  Wireless-G 

only  

 •

If  you  have  only  Wireless-N  (2 4  GHz)  devices,  select 

Wireless-n only  

 •

If you have no Wireless-B, Wireless-G, and Wireless-N (2 4 GHz) 

devices in your network, select Disabled 

If you have a dual-band router, you can select Mixed, Wireless-A 
Only, Wireless-N Only, or Disabled for the 5 GHz band 

If you are not sure which mode to use, keep the default, Mixed