Cnet CWP-905 用户手册

Here are descriptions of every setup items:

Wireless mode

Select wireless operation mode, available options are 802.11 B/G

mix, 802.11 B only, and 802.11 B/G/N mix. You can select 802.11

B/G/N mix to maximize wireless compatibility with wireless access

points and other wireless devices. Anyway, you can set this setting

to ‘802.11 B only’ when you’re going to communicate with old

802.11b wireless devices and you got problem using other two

modes.

Wireless

This setting helps your network card to avoid

Protection

interference with other wireless devices when there are both

802.11b and 802.11g wireless devices in the same place. It’s

recommended to set this setting to ‘Auto’ , since enabling this

setting will slightly reduce the data transfer performance.

TX Rate

Normally, the wireless network card will adjust transfer rate

automatically according to wireless signal quality. However, you

can fix the data transfer rate to a lower fixed rate if you think there’s

some problem about data transfer, or you’re too far from wireless

access point. It’s recommended to set this setting to ‘Auto’, unless

you really know the meaning of this setting.

Tx BURST

Check this box to accelerate the data transmit rate. It may not work

with all wireless access point and wireless devices.

Enable TCP

Check this box and the configuration utility will

Window Size

adjust TCP window size automatically, to get better performance. It

should be safe for most of wireless environments, but if you found

some problem on data transfer, uncheck this box.

Fast Roaming at

Check this box and you can adjust the threshold of

when this wireless network card should switch to another wireless

access point with better signal quality. Only adjust value when you

understand what it means.

Turn off RF

Click this button to switch wireless radio off, click it

again switch wireless radio on.