Cnet CWP-905 用户手册

Direct Link

Enable or disable direct link setup (DLS) function.

Setup Enable

This function will greatly improve the data transfer rate between

WMM-enabled wireless devices. Please click ‘Apply’ button on the

right of this check box after you check or uncheck this box, so

corresponding settings in this window will be activated or

deactivated respectively.

MAC Address

Input the MAC address of another WMM-enabled

wireless device you wish to establish a direct link here, then click

‘Apply’ to add this MAC address to DLS address table.

Timeout Value

Input the timeout value of this WMM-enabled direct link wireless

device. If the wireless device is not responding after this time, it will

be removed from DLS table.

Tear Down

If you want to remove a specific wireless device from DLS table,

select the device and click this button to remove it.

After you finish the settings, click ‘OK’ to close configuration utility.