Cnet CWP-905 用户手册

 

If you encounter any problem when you’re using this wireless network card, don’t panic! Before 

you call your dealer of purchase for help, please check this troubleshooting table, the solution 

of your problem could be very simple, and you can solve the problem by yourself! 

 

Scenario 

Solution 

I can’t find any wireless access 

point / wireless device in ‘Site 

Survey’ function. 

1.  Click ‘Rescan’ for few more times and see if you can 

find any wireless access point or wireless device. 

2.  Please move closer to any known wireless access 

point. 

3.  ‘Ad hoc’ function must be enabled for the wireless 

device you wish to establish a direct wireless link. 

4.  Please adjust the position of network card (you may 

have to move your computer if you’re using a 

notebook computer) and click ‘Rescan’ button for 

few more times. If you can find the wireless access 

point or wireless device you want to connect by 

doing this, try to move closer to the place where the 

wireless access point or wireless device is located. 

Nothing happens when I click 

‘Launch config utilities’ 

1.  Please make sure the wireless network card is firmly 

inserted into your computer’s PCI slot. If the Ralink 

configuration utility’s icon is black, the network card 

is not detected by your computer. Switch the 

computer off and insert the card again. If this doesn’t 

work, contact the dealer of purchase for help. 

2.  Reboot the computer and try again. 

3.  Remove the driver and re-install. 

4.  Contact the dealer of purchase for help. 

I can not establish connection 

with a certain wireless access 

point 

1. Click ‘Connect’ for few more times. 

2. If the SSID of access point you wish to connect is 

hidden (nothing displayed in ‘SSID’ field in ‘Site 

Survey’ function), you have to input correct SSID of 

the access point you wish to connect. Please 

contact the owner of access point to ask for correct 

SSID. 

 

65