Motorola SVG1501UE 用户手册

B 

9 • Wireless Pages 

49 

  

Sets the WPA Pre-Shared Key (PSK); either an 8-63 ASCII 
character string or a 64-digit hex number. This is specified 
when the Network Authentication method is WPA-PSK. 

Show Key - displays the WPA Pre-Shared Key. 

Sets the RADIUS server IP address to use for client 
authentication using the dotted-decimal format 
(xxx.xxx.xxx.xxx). 

Sets the UDP port number of the RADIUS server; default is 
1812. 

Sets the shared secret for the RADIUS connection; key is a 0 
to 255 character ASCII string. 

Sets the WPA Group Rekey Interval in seconds. Set to zero to 
disable periodic rekeying. 

Sets the amount of time the wireless router can wait before 
re-establishing authentication with the CPE. 

Enables or disables Wired Equivalent Privacy encryption. 

Sends an authentication request to the access point. Then the 
access point sends a challenge text to the CPE.  

The CPE encrypts challenge text which it sends to the access 
point. The access point decrypts and compares the message 
with the original challenge text. If they are the same, the 
access point lets the CPE connect; if it does not match, the 
access point does not let the CPE connect. 

Uses a stronger authentication than WEP and can be used in 
addition.. 

Sets the static WEP keys when WEP encryption is enabled. 

• 

Enter five ASCII characters or 10 hexadecimal digits for a 
64-bit key. 

• 

Enter 13 ASCII characters or 26 hexadecimal digits for a 
128-bit key. 

When both WPA encryption and WEP encryption are enabled, 
only keys 2 and 3 are available for WEP encryption. 

Selects the encryption (transmit) key when WEP encryption is 
enabled. 

Sets the text to use for WEP key generation.