Motorola SVG1501UE 用户手册
B
12 • Troubleshooting
69
12
Troubleshooting
If the solutions listed here do not solve your problem, contact your service provider.
Before calling your service provider, try pressing RESET on the SVG1501 rear panel.
Note: Pressing RESET restores the default settings. You will lose your
custom configuration settings, including Parental Control, Firewall and
Advanced settings.
custom configuration settings, including Parental Control, Firewall and
Advanced settings.
Resetting the SVG1501 may take 5- to 30 minutes. Your service provider may ask for the
front panel LED status, see
front panel LED status, see
Solutions
Table 1 – Troubleshooting Solutions
Problem
Possible Solution
Power light is off
Check that the SVG1501 is properly plugged into the electrical outlet.
Check that the electrical outlet is working.
Press the RESET button.
Cannot send or
receive data
receive data
Note the status of the LEDs on the front panel, and refer to
to identify the error. If you have cable TV,
check that the TV is working and the picture is clear. If you cannot
receive regular TV channels, the data service will not function.
receive regular TV channels, the data service will not function.
Check the coaxial cable at the SVG1501 and wall outlet. Hand-tighten, if
necessary.
necessary.
Check the IP address. Follow the steps for verifying the IP address for
your system described in
your system described in
. Call your service
provider if you need an IP address.
Check that the Ethernet cable is properly connected to the SVG1501
and the computer.
and the computer.
Verify connectivity of any device connected via the Ethernet port, by
checking the LINK LEDs on the rear panel.
checking the LINK LEDs on the rear panel.