Adtran 4110 用户手册

下载
页码 205
61200176L3-1
Express 4110/4120 User Manual
2-1
Chapter 2
Installation
After unpacking the unit, immediately inspect it for possible shipping 
damage.  If damage is discovered, file a claim immediately with the ship-
ping carrier; then contact the ADTRAN CAPS department (see back 
page).
ISDN NETWORK CONNECTION
The  Express 4110/4120 supports either dial or leased operation.  A single 
RJ-49C modular jack labeled ISDN on the rear panel provides connection 
to either network service. Dial operation allows the user to dial out or 
receive calls over the public network. The leased operation mode sup-
ports dedicated 2B1Q data service at rates up to 128 kbps by using a 
nailed up circuit, or a permanent connection between endpoints.
See “Connector Pinouts” on page D-1 for ISDN network connector pin 
assignments.
4110 LOCAL AREA NETWORK CONNECTION 
The  Express 4110 has a single 10BaseT connection port that provides half 
duplex 10 Mbps operation over a 4-wire twisted pair. Other types of 
Ethernet interfaces (i.e., AUI, 10Base2, etc.) can be accommodated by 
obtaining an appropriate converter. 
4120 LOCAL AREA NETWORK CONNECTION 
The  Express 4110/4120 has an integrated hub with four 10BaseT connec-
tion ports. Each port can provide half duplex 10 Mbps operation over a 4-
wire twisted pair. All four 10BaseT connection ports are the same and are 
treated equally by the Express 4110/4120.