Motorola 7.7.4 用户手册
168
Starting and Ending a CLI Session
Open a telnet connection from a workstation on your network.
You initiate a telnet connection by issuing the following command from an IP host that sup-
por ts telnet, for example, a personal computer running a telnet application such as NCSA
Telnet.
por ts telnet, for example, a personal computer running a telnet application such as NCSA
Telnet.
telnet <ip_address>
You must know the IP address of the Motorola Netopia® Gateway before you can make a
telnet connection to it. By default, your Motorola Netopia® Gateway uses 192.168.0.1 as
the IP address for its LAN inter face. You can use a Web browser to configure the Motorola
Netopia® Gateway IP address.
telnet connection to it. By default, your Motorola Netopia® Gateway uses 192.168.0.1 as
the IP address for its LAN inter face. You can use a Web browser to configure the Motorola
Netopia® Gateway IP address.
Logging In
The command line inter face log-in process emulates the log-in process for a UNIX host. To
logon, enter the username (either admin or user), and your password.
logon, enter the username (either admin or user), and your password.
•
Entering the administrator password lets you display and update all Motorola Netopia®
Gateway settings.
Gateway settings.
•
Entering a user password lets you display (but not update) Motorola Netopia® Gateway
settings.
settings.
When you have logged in successfully, the command line inter face lists the username and
the security level associated with the password you entered in the diagnostic log.
the security level associated with the password you entered in the diagnostic log.
snmp
SNMP management options
system
Gateway’s system options
upnp
UPnP options
vdsl
VDSL tuning options
vlan
VLAN options
wireless
Wireless LAN options
Command Utilities
top
Go to top level of configuration mode
quit
Exit from configuration mode; return to shell mode
exit
Exit from configuration mode; return to shell mode