Motorola 7.7.4 用户手册
248
set ip ip-ppp vcc1 mcast-fwd [ on | off }
Enables or disables multi-cast for warding on the specified inter face. If set to
on, this inter-
face acts as an IGMP proxy host, and IGMP packets are transmitted and received on this
inter face on behalf of IGMP hosts on the LAN inter face. See
inter face on behalf of IGMP hosts on the LAN inter face. See
for more information.
set ip ip-ppp vcc1 igmp-null-source-addr [ off | on ]
Enables or disables IGMP null source address, if
mcast-fwd is set to on. If enabled, the
source IP address of ever y IGMP packet transmitted from this inter face is set to 0.0.0.0.
This complies with the requirements of TR-101, and removes the need for a publicly adver-
tised IP address on the WAN inter face.
This complies with the requirements of TR-101, and removes the need for a publicly adver-
tised IP address on the WAN inter face.
Ethernet Port Settings
set ethernet ethernet A mode { auto | 100M-full | 100M-full-fixed |
100M-half-fixed | 10M-full-fixed | 10M-half-fixed |
100M-half | 10M-full | 10M-half }
100M-half-fixed | 10M-full-fixed | 10M-half-fixed |
100M-half | 10M-full | 10M-half }
Allows mode setting for the ethernet por t. Only suppor ted on units without a LAN switch, or
dual ethernet products (338x). In the dual ethernet case, “ethernet B” would be specified
for the WAN por t. The default is
dual ethernet products (338x). In the dual ethernet case, “ethernet B” would be specified
for the WAN por t. The default is
auto.