Netopia 3347-02 产品宣传页

Broadband Without Boundaries®

 

1.

 

Put the Gateway near a power source, a DSL wall outlet, and in a location where air can circulate freely 

around it.

 

2.

 

Connect the power supply to the power jack on the back panel of the Gateway. Then, plug the power supply 

into an electrical outlet. Turn on the Power switch.

The 

 

 LED should light solid green.

 

3.

 

The Netopia Installation Guide Wizard automates several tasks to get you up and running easily. These 

tasks include making the cable connections and configuring the Gateway

. Run the Wizard on every Win-

dows-based PC that will connect to your network.

The Installation Guide Wizard will start automatically and 

the Welcome screen will appear to step through the pro-

cess. 

Follow the on-screen instructions to make all of your 

connections.

When all of your connections are made, your network may look like this: 

When all of your connections are made, the status LEDs on the front of your Netopia Gateway will light, 

according to the following diagram:

Netopia Gateways serve Dynamically-assigned IP addresses by default. Be sure to configure each computer 

connected to your Netopia Gateway to accept a Dynamically-assigned IP address, commonly referred to as 

DHCP .

If you need instructions, refer to your computer’ s operating system documentation for information about 

DHCP configuration.

2

Flashes 

 when there is

activity on the LAN.

Solid 

 when connected.

 when pow

er is on.

Flashes 

 when there is

activity on the wireless LAN.

Solid 

 when Internet

connection is established

Solid 

 when Gatew

ay is connected.

Flashes 

 when transmitting or

receiving data on the W

AN port.

3

 

You can access the configuration pages at any time as follows:

 

1.

 

Press Return.

 

2.

 

You will be asked to log in to your Gateway with a UserName 
and Password.

The default UserName is 

 

. Enter the Password you 

just created. Type these in their respective fields and click 

 

.

 

3.

 

After your Gateway negotiates its connection to the Internet, your browser will be directed to the Netopia 
product registration page. If it fails to do this, navigate to:

 

to register your Gateway. This allows you to receive our e-Mail Bulletin with the latest news and product 
information.

 

 Your connection is up and running and you should be able to browse the Internet by typing a 

URL address in your browser’s Address text box or by selecting any of your favorite bookmarks.

Should you require additional information, the inside pages of this Guide contain Frequently Asked Questions (and 
Answers) and Basic Troubleshooting tips. The latest 

 

 with advanced configuration instructions is also 

available on-line at: 

 

Thank you for selecting the Netopia 3347-02 Extreme Wireless DSL Gateway. This guide will help you set up and 
configure your network. [FAQs and Troubleshooting Tips are located on the inside pages.]

Check your package contents. It should contain the items shown here:

If you don’t have everything, contact your supplier immediately.

4

1

 

 6180171-00-01

 

Copyright 2006, Netopia, Inc. Netopia, the Netopia logo, and Broadband Without Boundaries are registered trademarks belonging to Netopia, Inc., registered 
U.S. Patent and Trademark Office. All other trademarks are the property of their respective owners. All rights reserved.