Adtran 4120 用户手册
Chapter 3. Terminal Menu Operation and Structure
3-60
Express 4110/4120 User Manual
61200176L3-1
Communities/Manager IP
Write security: 1; Read security: 3
Write security: 1; Read security: 3
This is the IP address of SNMP manager. If set to 0.0.0.0, any SNMP
manager can access the Express 4110/4120 for this community.
manager can access the Express 4110/4120 for this community.
SNMP/Traps
The Express 4110/4120 can generate SNMP traps. See “SNMP” on page C-
1 for trap types supported. This list allows up to four managers to be
listed to receive traps.
1 for trap types supported. This list allows up to four managers to be
listed to receive traps.
Traps/Manager Name
Write security: 2; Read security: 4
Write security: 2; Read security: 4
This is the text string describing the name of the entry. It is intended
for easy reference and has no bearing on the SNMP trap function.
for easy reference and has no bearing on the SNMP trap function.
Traps/Manager IP
Write security: 2; Read security: 4
Write security: 2; Read security: 4
This is the IP address of the manager that is to receive the traps.
Management/Maint Port
The Express 4110/4120 has an EIA-232 connector on the back of the unit.
The setup for that port is under this menu.
The setup for that port is under this menu.
Maint Port/Password Protect
Write security: 0; Read security: 1
When set to No, the maintenance port is not password protected. When
On
On
(def), the Express 4110/4120 will prompt for a password upon startup.
Maint Port/Password
Write security: 0; Read security: 1
This is the text string that is used for comparison when password protect-
ing the maintenance port. By default, no password is entered.
ing the maintenance port. By default, no password is entered.
The security level for the maintenance port is always set to 0. This gives full access to all menus.