Netgear WNDR3400-100NAS 用户手册

Installing Your Wireless Router Manually (Advanced and Linux Users)

17

•

Internet. The Internet port light (5) should be lit. If it is not, make sure that the Ethernet cable 
is securely attached to the wireless router Internet port and that the modem, and that the 
modem is powered on.

•

LAN. A LAN light (6) should be lit. Green indicates that your computer is communicating at 
100 Mbps; amber indicates 10 Mbps. If a LAN light is not lit, check that the Ethernet cable 
from the computer to the router is securely attached at both ends, and that the computer is 
turned on.

When configuring your wireless router manually, you must log in to your wireless router to set it 
up initially and to make any changes to your wireless router’s settings later.

Connect to the wireless router by typing http://www.routerlogin.net in the address field of 
your browser, and then press Enter.

The factory default state is reset when you use the Restore Factory Settings button. 
See 

 for 

more information.

Connect to the wireless router by typing any one of these three URLs in the address 
field of your browser, then pressing Enter:

• 

•