Netgear WNDR3400-100NAS 用户手册

Configuring Your Wireless Network

21

After installing your router, you must log into the router to complete your wireless setup. When 
you log in to the browser, you will be prompted to check for firmware updates from the 
NETGEAR update server. 

The Smart Wizard only appears when you first install the router or when the router is in its factory 
default state (for example, if you have reset the router to its factory default settings). If you want to 
change the settings after installing and configuring your router, you can click the desktop 
shortcut—a preconfigured shortcut 

 placed on your desktop by the Smart Wizard at 

installation—to open the router management interface.

1

 You can also change your settings, or 

configure your wireless and security settings, by opening a browser window and logging in to the 
router. You will also be prompted to check for new router firmware to the router. You will also be 
prompted to check for new router firmware.

Open a browser window and type http://www.routerlogin.net in the address field of your 
browser. Press Enter.

.

1. The shortcut icon is installed on your desktop only when using the Smart Wizard installation method.

You can enter either of these addresses to connect to your wireless router: 

http://www.routerlogin.net or http://www.routerlogin.com.