Nokia 6800 Series 用户手册

Error Reporting

The on error closing contact can report the 
following conditions:
J1

- No data

- Equalizer has exceeded the preset cable length

Operating Standard

- Selects Composite operation 143 Mb/s or 177 

Mb/s. 
With no jumper fitted the selection is Auto.
J4

- Selects Auto standard selection.

- Selects Component operation 270 Mb/s or 360 

Mb/s.

Error

This indicates that the error condition set in 1 
exists.

No Data

This indicates that there is no input data.

Eq Warning

This indicates that the equalizer has reached the 
preset value. This is not illuminated if “no data” is 
illuminated.

270

This indicates that the current input standard is 
270 Mb/s (D1) This is not illuminated if “no data” 
is illuminated.

143

This indicates that the current input standard is 
143 Mb/s (D2-NTSC). This is not illuminated if 
“no data” is illuminated.

177

This indicates that the current input standard is 
177 Mb/s (D2-PAL). This is not illuminated if “no 
data” is illuminated.