Netopia R5200 用户手册

For R5100 SA and R5300 T1 models the Default Profile screen controls whether or not the communication link 
will come up without an explicitly configured connection profile. If you have an R5200 DDS model, you can skip 
this section. See 

 for more information. You access the Default Profile screen 

from the Main Menu by selecting WAN Configuration and then selecting Default Profile. 

The Default Profile screen appears.

■

You can set Must Match a Defined Profile item to Yes or No (the default). This item controls whether or 
not the communication link will come up without an explicitly configured connection profile. If your ISP is 
ser ving you a dynamic IP Address, you need not explicitly configure a connection profile, and the default 
behavior of the router will be to connect automatically once it is powered on.

If Must Match a Defined Profile is set to No, then an IP Enabled item is visible. Toggling this item to Yes 
(the default) or No controls whether or not IP will be suppor ted on the communication link. If IP Enabled is 
set to Yes, an IP Parameters item becomes visible. If you select IP Parameters the IP Parameters screen 
appears (see 

). This screen allows you to configure 

various IP parameters for connections established without an explicitly configured connection profile.

Main

Menu

WAN

Configuration

Default

Profile

                               Default Profile

         Must Match a Defined Profile:      No

         IP Enabled:                        Yes
         IP Parameters...

         IPX Enabled:                       Yes
         IPX Parameters...

Configure Default WAN Connection Parameters here.