Panasonic WJ-SX 150 用户手册
126
This section will describe what you should take notice when using a PS·Data system controller.
The same descriptions as those of digital disk recorders are not mentioned here. Refer to p.xx for details.
The same descriptions as those of digital disk recorders are not mentioned here. Refer to p.xx for details.
Notes:
• Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the
time-lapse VCR, and configure the system through WJ-SX150 Administrator Console, OSD SETUP MENU, and time-lapse
VCR's SETUP MENU. [Refer to p. 34 Installing the Multiplexer Board, p. 45 Connection with the Time-lapse VCR
(Panasonic Models), p. 52 WJ-SX150 SETUP MENU (OSD), and p. 64 WJ-SX150 ADMINISTRATOR CONSOLE.]
VCR's SETUP MENU. [Refer to p. 34 Installing the Multiplexer Board, p. 45 Connection with the Time-lapse VCR
(Panasonic Models), p. 52 WJ-SX150 SETUP MENU (OSD), and p. 64 WJ-SX150 ADMINISTRATOR CONSOLE.]
• The time-lapse VCR's SETUP MENU cannot be displayed from a system controller.
■
Controlling the Time-lapse VCR with a PS·Data System Controller
Function Code
Forward field advance
1
Backward field advance
2
Pause
4
Playback
5
Recording
6
Stop recording/playback
8
TIME-LAPSE VCR CONTROL (PS·DATA)