Panasonic WJ-SX 150 用户手册

62

Activates the manual cleaning for the cameras.

Deactivates the manual cleaning.

When you set CAMERA CLEANING to ON and exit from the
SETUP MENU, camera cleaning will start.

The factory default setting is OFF.

• When the camera cleaning is active, cleaning will begin

from CAM 1 in numerical order. 

• Surveillance is impossible during the cleaning. 
• The cleaning cannot be stopped after it is started.
• Refer to pp. 38 and 39 for details on RS-485 or PS·Data

connections.

• The camera address needs to be corresponding with

the camera number.

■

●

To display this menu on the monitor, move the cursor to
800 OPERATOR REGISTRATION in SETUP MENU by mov-
ing the joystick to ▼.Then, press the CAM (SET) button. The
submenu appears on the monitor.

●

Move the joystick to move the cursor.
Press the NEXT or PREV button to select the desired para-
meters.
Press the numeric button(s) to enter a number.

This stands for an operator number. When you enter the
number by pressing the NEXT, PREV or numeric button(s),
this menu will display the associated operator's information.
1 to 16 is available.

This stands for an operator ID. 1 to 99999 is available.

This stands for an operator's password. 1 to 99999 is avail-
able. The password will be displayed as "*" on the monitor. 

This stands for an operator's priority. 1 to 16 is available.
(Refer to p. 14 for details on Priority Lock.)

This stands for an operator's restrict level. It is configurable
through Level Table (refer to p. 76) of WJ-SX150
Administrator Console what kind of restriction is given to the
operator. 1 to 3 is available.

These stand for an operator's camera operation coverage.
The following are the parameters.

The operator can display the

camera image on the monitor and control pan-
ning/tilting.

The operator can display the camera

image on the monitor, but cannot control the
panning/tilting.

The operator can neither display the

camera image on the monitor nor control the
panning/tilting.

The following is the factory default setting of this menu.

When you enter an invalid number, the parameter will

return to the state before your numerical entry.

■

●

This menu will appear only when the Multiplexer board
is installed in the unit. To display this menu on the moni-
tor, move the cursor to 900 MULTIPLEXER in SETUP
MENU by moving the joystick to D or  C. Then, press
the CAM (SET) button. The submenu appears monitor.

6

OPERATOR NO.

ID

PASSWORD

LEVEL

PRIORITY

1

150

150

1

1

2

1

12345

1

2

3

100

100

1

3

4

101

101

1

4

5

102

102

2

5

6

103

103

3

CAM 1 to 16 = VIEW & CONTROL (for OPERATOR NO. 1 to
6