EnGenius Technologies 1.2 用户手册
25
Enable uPNP: Place a check in this box to enable UPnP. It is recommended to
enable this feature as it’s used by several applications.
enable this feature as it’s used by several applications.
Enable PING Access on WAN: Place a check in this box if you would like the device
to be pinged from the WAN side (ISP).
to be pinged from the WAN side (ISP).
Enable Web Sever Access on WAN: Place a check in this box if the static IP
address if used for a web-server.
address if used for a web-server.
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of IPsec packets on a VPN connection.
enable the pass through of IPsec packets on a VPN connection.
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of PPTP packets on a VPN connection.
enable the pass through of PPTP packets on a VPN connection.
Enable IPsec pass through on VPN connection: Place a check in this box to
enable the pass through of L2TP packets on a VPN connection.
enable the pass through of L2TP packets on a VPN connection.
Click on the Apply Changesto save the changes.
WAN Settings – PPPoE
Click on the WAN link on the navigation drop-down menu. This feature allows you to
configure the WAN interface using a static IP address, DHCP Client, PPoE, or PPTP.
A PPPoE service requires a user name and password to log into the Internet and is
usually a DSL service.
A PPPoE service requires a user name and password to log into the Internet and is
usually a DSL service.
WAN Access Type: Select PPPoE from the drop-down list. This type of connection
is usually used for a DSL service and requires a username and password to connect.
is usually used for a DSL service and requires a username and password to connect.
User Name: Specify the user name which is provided by your ISP.
Password: Specify the password which is provided by your ISP.
Service Name: Specify the name of the ISP.