Fortinet 50B 用户手册
Configuring the FortiGate unit
Next steps
FortiGate-50A/50B, FortiWiFi-50B and FortiGate-100 FortiOS 3.0 MR4 Install Guide
01-30004-0265-20070831
01-30004-0265-20070831
49
Example
config system autoupdate schedule
set update every Sunday
set frequency weekly
set status enable
set time 16:45
set frequency weekly
set status enable
set time 16:45
end
Adding an override server
If you cannot connect to the FDN, or if your organization provides updates using
their own FortiGuard server, use the following procedures to add the IP address of
an override FortiGuard server in either the web-based manager or the CLI.
their own FortiGuard server, use the following procedures to add the IP address of
an override FortiGuard server in either the web-based manager or the CLI.
To add an override server from the web-based manager
1
Go to System > Maintenance > FortiGuard Center.
2
Select the blue arrow for AntiVirus and IPS Downloads to expand the options.
3
Select the Use override server address check box.
4
Type the fully qualified domain name or IP address of a FortiGuard server.
5
Select Apply.
The FortiGate unit tests the connection to the override server.
If the FDN setting changes to available, the FortiGate unit has successfully
connected to the override server.
connected to the override server.
If the FDN stays set to not available, the FortiGate unit cannot connect to the
override server. Check the FortiGate configuration and network configuration for
settings that would prevent the FortiGate unit from connecting to the override
FortiGuard server.
override server. Check the FortiGate configuration and network configuration for
settings that would prevent the FortiGate unit from connecting to the override
FortiGuard server.
To add an override server using the CLI
1
Log into the CLI.
2
Enter the following command:
config system autoupdate override
set address
set status
set status
end