IMC Networks 6 用户手册

 

13

 

SNMP Management Modules include two twisted pair ports, one for management 
and one reserved for future use.  The Management Module also features a DB-9 
serial port, and supports SNMP V1/V2c. 

To install a module: 

1.  Remove the blank bracket (if present) covering the slot where the module will be 

installed.  IMC Networks recommends installing blank brackets in unused 
module slots.  

2.  Slide the module into the chassis using the card guides. 
3.  Secure the module to the chassis by tightening the captive screw.  (Refer to the 

documentation shipped with the module for configuration information.) 

4.  When installing modules observe ESD precautions, refer to the Electrostatic 

Discharge Precautions section. 

In order to manage an iMediaChassis series, the SNMP Management Module needs 
to be installed in the appropriate slot of the chassis.    

•  Install the iMediaChassis/6 slot into the first slot on the far left of the chassis.