Huawei B970 用户手册
Dynamic DNS Settings
17
3
Advanced
Set
tings
• MAX Associations Limit: It refers to the maximum
number of connections. It is used to set the maximum
number of concurrent WLAN users on the device.
number of concurrent WLAN users on the device.
• Mode: It refers to the WLAN accessing mode. The
device can work in two modes, as shown in the
following table. The default value is Access Point.
following table. The default value is Access Point.
• Bridge Restriction: It refers to the limitation to the peer
MAC addresses. When it is Disabled, the device can
access all the remote bridges; when it is Enabled, the
device can only access the remote bridges that the
addresses are in the address list.
access all the remote bridges; when it is Enabled, the
device can only access the remote bridges that the
addresses are in the address list.
• Bridges: It refers to the physical address of the remote
peer bridge. The device supports the point-to-multipoint
(PTM) bridge mode.
(PTM) bridge mode.
• Peer MAC Address: It refers to the physical address
list of the remote peer bridges.
• Link Status: Up shows the successful connection and
Down shows the failed connection.
Dynamic DNS Settings
The DDNS feature will update Internet IP which
bound with registered Domain name periodically.
bound with registered Domain name periodically.
1
Click
to access the DDNS page.
2
Configure the parameters of DDNS.
• Provider: By default, the service provider is
dyndns.org.
• Host Name/Username/Password: Enter the
value for DDNS registration.
3
Click Ok.
• Validate: Click Apply to validate.
• Change: Click
in the Modification column.
• Delete: Click
in the Modification column
.
Mode
Description
Wireless
Bridge
Bridge
It is used to connect two or more access
points.
points.
Access
Point
Point
The access points meeting the IEEE
802.11b/g standard or the wireless
terminals can connect the wireless
device.
802.11b/g standard or the wireless
terminals can connect the wireless
device.