RAD Data comm ASMi-52 用户手册
Chapter 4 Configuration
Installation and Operation Manual
4-16
Configuring ASMi-52 System Parameters
ASMi-52 Ver. 2.5
Configuring Control Port Parameters
The embedded ASMi-52 software enables you to configure the Control port
parameters.
parameters.
To access the Control port menu:
• From the System Configuration menu, select Control Port (Main menu >
• From the System Configuration menu, select Control Port (Main menu >
Configuration > System Configuration > Control Port).
The Control Port menu appears (see
Figure 4-20
)
ASMi-52
Control Port
1. Rate
1. Rate
>(9600 bps)
2. Interface
(DCE)
3. CTS
(=RTS)
4. DSR
(DTR)
5. Port Control
>
6. Save
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-20. Control Port Menu
Changing the Control Port Data Rate
The control port of ASMi-52 supports different data rates that can be configured
via the Rate menu (see
via the Rate menu (see
Figure 4-21
).
To configure the control port data rate:
1. From the Control Port menu, select Rate (Main menu > Configuration >
1. From the Control Port menu, select Rate (Main menu > Configuration >
System Configuration > Control Port > Rate).
The Rate menu appears (see
Figure 4-21
).
2. Select the terminal rate by typing the number corresponding the required
value, and press <Enter>.
3. Select Save to save the changes.
ASMi-52
Rate (9600 kbps)
1. 9600 kbps
2. 19200 kbps
3. 38400 kbps
4. 57600 kbps
5. 115200 kbps
1. 9600 kbps
2. 19200 kbps
3. 38400 kbps
4. 57600 kbps
5. 115200 kbps
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 4-21. Control Port Rate Menu