Verizon MI424WR 用户手册
64
Wireless Broadband Router User Manual
65
Chapter 5 Using Network Connections
Network Displays the type of network to which the link is connected. Since this
is a broadband connection (connected to the Internet), “Broadband Connection
is displayed.
is a broadband connection (connected to the Internet), “Broadband Connection
is displayed.
Connection Type Displays the type of connection. Since this is a coaxial connec-
tion, “Coax” is displayed.
tion, “Coax” is displayed.
Physical Address Displays the physical address of the network card used for the
network.
network.
MTU
MTU
(Maximum Transmission Unit) specifies the largest packet size
permitted for Internet transmission. “Automatic” sets the
MTU
at 1500. Other
choices include “Automatic by
DHCP
,” which sets the
MTU
according to the
DHCP
connection, and “Manual,” which allows the
MTU
to be set manually.
Coax Link
Check and configure the coax link connection in this section of the screen.
Check and configure the coax link connection in this section of the screen.
Channel Displays the channel frequency range of the coaxial connection. This
setting is not user configurable; it is for information only.
setting is not user configurable; it is for information only.
Privacy Toggle “Privacy” by clicking in the “Enabled” check box. If Privacy is
activated, all devices connected via coaxial cable must use the same password.
We recommend leaving the Privacy option deactivated.
activated, all devices connected via coaxial cable must use the same password.
We recommend leaving the Privacy option deactivated.
Password Enter the Coax Link password here.
WAN Coax Connection Speeds
This section displays the Router’s Tx and Rx speeds (in Mbps).
This section displays the Router’s Tx and Rx speeds (in Mbps).
Internet Protocol
This section includes three options: No IP Address, Obtain an IP Address
Automatically, and Use the Following IP Address.
This section includes three options: No IP Address, Obtain an IP Address
Automatically, and Use the Following IP Address.
No IP Address Select this option if the connection has no
IP
address. This is use-
ful when the connection is operating under a bridge.