Atlantis Land A02-RAV260-W54 用户手册

                                                                                                                                   

VoIPMaster 260W  

 

 

47

•  Give DNS to Client: Controls whether the PPP Internet Protocol Control Protocol (IPCP) 

can request a DNS server IP address for a remote PPP peer. Once IPCP has discovered 
the DNS server IP address, it automatically gives the address to the local DNS client so 
that a connection can be established. 

•  Give DNS to DHCP Server: Similar to the above, but gives the DNS server address to 

the DHCP server. 

•  Discover Primary NBNS / Discover Secondary NBNS: This setting enables/disables 

whether the primary/secondary NBNS server address is requested from a remote PPP 
peer using IPCP. The default setting for this command is disabled. 

•  Discover Subnet Mask: Specifies if the subnet mask given by IPCP negotiation process 

is to be used. 

•  Give Subnet Mask To DHCP Server: Enable to change your DHCP Server settings by 

using the given information in IPCP negotiation process. 

 

•  Description: Your description of this connection. 
•  VPI and VCI: Enter the information provided by your ISP.  
•  ATM Class: The Quality of Service for ATM layer. 
•  NAT: The NAT (Network Address Translation) feature allows multiple users to access 

the Internet through a single IP account, sharing the single IP address. If users on your 
LAN have public IP addresses and can access the Internet directly, the NAT function can 
be disabled. 

•  Encapsulation method: Select the encapsulation format, the default is LLC Bridged. 

Select the one provided by your ISP. (Only for RFC1483 Routed). Usually You have to 
select LLC Routed. 

•  DHCP client: Enable or disable the DHCP client, specify if the router can get an IP 

address from the Internet Service Provider (ISP) automatically or not.