Atlantis Land A02-RAV260-W54 用户手册

                                                                                                                               

VoIPMaster 260W  

 

 

60

•  Add Raw IP Filter: Click this button to add a new Protocol Filter.  
•  Packet Filter Rules: On this table, you see packet filter rules; you can click on Edit to 

modify rule or Delete 

 

•  Rule Name: Insert rule name; rule name must be different 
•  Time Schedule: It is self-defined time period. You may specify a time schedule for your 

prioritization policy. For setup and detail, refer to Time Schedule section  

•  Source IP Address(es) / Destination IP Address(es): This is the Address-Filter used 

to allow or block traffic to/from particular IP address(es). Selecting the Subnet Mask of 
the IP address range you wish to allow/block the traffic to or form; set IP address and 
Subnet Mask to 0.0.0.0 to inactive the Address-Filter rule. 

•  Type: Specify the packet type (UDP or TCP) that the rule will be applied to. 
•  Source Port: This Port or Port Ranges defines the port allowed to be used by the 

Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is 
recommended that this option be configured by an advanced user. 

•  Destiantion Port: This is the Port or Port Ranges that defines the application. 
•  Inbound / Outbound: Select Allow or Block the access to the Internet (“Outbound”) 

or from the Internet (“Inbound”).