Atlantis Land A02-RAV260-W54 用户手册

                                                                                                                              

VoIPMaster 260W 

                                                                                                        

 

   

 

81 

The following table lists the special dial codes that are built-in to the system:  

(Wireless Router with 
LINE port only) 

Switch to PSTN line 

Note: A quick press of the hook. On some phones a button 
is provided which provides Flash-hook functionality. The 
button is marked "FLASH" or "RECALL". 

Return the last missed call for SIP service only 

Note: Entering this on a phone will call the last number 
which made a call to the phone. For example A makes a call 
to B, but hangs up before B answers. If B enters *69, A will 
be called. 

Last number redial 

Set do not disturb on 

Note: It is possible to set a Do-Not-Disturb feature on a 
phone such that any phone which calls the phone will 
receive an engaged tone and the phone called will not ring. 
For example, B enters *20 and hangs up. A makes a call to 
B, and receives the engaged tone and phone B does not 
ring. 

Set do not disturb off 

Set the number for Speed dial code ‘x’, where ‘x’ is a 
number between 2 and 9. 

Note: Where <x> is a number between 2 and 9, and 
<number> is the number to dial. The code needed to dial a 
speeddial from a phone connected to a VoIP Router is: 
 <x>#, where <x> is a number between 2 and 9. 
The settings will infect to your setting in Speed Dial on WEB 
GUI. 

Set the number for performing Blind Call Transfer, where 
<phone-number> is the number that you wish to transfer the 
call to. It’s for SIP service only. 

Note: In Blind Call Transfer, you have a call in progress 
(incoming or outgoing) and decide you wish to transfer the 
call to another phone. To transfer the call, perform the 
following steps: 

1. Hook-flash to get a dial tone.