Atlantis Land A02-RA340 用户手册

                                                                                                                            

WebShare 340/440  

 

20 

 

The default username and password are admin and atlantis respectively. 

 

If you ever forget the password to log in, you may press the RESET button to 
restore the factory default settings. After turning the router on press the 
Emergency/Failure Recovery Button on the back of the modem, and hold the 
button in until all lights on the modem flash and it reboots with factory default 
settings. The login will be reset to admin and the password will be reset to 
admin, and the modem will be accessible via its default IP address at 
http://192.168.1.254/ 

The parameters of LAN and WAN ports are pre-set in the factory.  The default values are 
shown below. 

192.168.1.254 

255.255.255.0 

Enabled 

N/A 

Before configuring this device, you have to check with your ISP (Internet Service Provider) 
what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA. 
Gather the information as illustrated in the following table and keep it for reference. 

PPPoE 

VPI/VCI, VC-based/LLC-based multiplexing, Username, 
Password, Service Name, and Domain Name System 
(DNS) IP address (it can be automatically assigned from 
ISP or be set fixed). 

VPI/VCI, VC-based/LLC-based multiplexing, Username, 
Password, and Domain Name System (DNS) IP 
address (it can be automatically assigned from ISP or 
be set fixed). 

VPI/VCI, VC-based/LLC-based multiplexing and configure 
this product into BRIDGE Mode. 

VPI/VCI, VC-based/LLC-based multiplexing, IP address, 
Subnet mask, Gateway address, and Domain Name 
System (DNS) IP address (it is fixed IP address). 

VPI/VCI, IP address, Subnet mask, Gateway address, 
and Domain Name System (DNS) IP address (it is fixed 
IP address).