Atlantis Land A02-RA340 用户手册

                                                                                                                            

WebShare 340/440  

 

 

69 

If you have multiple public/WAN IP addresses from you ISP, you are eligible for One-to-One 
NAT to utilize these IP addresses. 
 

 

 
NAT Type: Select desired NAT type. As set in default setting, it disables the One-to-One 
NAT function. 
Global IP Address: 
Subnet: The subnet of the public/WAN IP address given by your ISP. If your ISP has 
provided this information, you may insert it here. Otherwise, use IP Range method. 
IP Range: The IP address range of your public/WAN IP addresses. For example, IP: 
192.168.1.1, end IP: 192.168.1.10 
 
Select the Apply button to apply your changes. 
 
Check to Add Entry create a new One-to-One NAT rule: 
 

 

 
Time Schedule: A self-defined time period to enable your virtual server. You may specify a 
time schedule or Always on for the usage of this Virtual Server Entry. For setup and detail, 
refer to Time Schedule section 
Application: Users-defined description to identify this entry or click to select existing 
predefined rules. Click the Radio button to select the rule; Application, Protocol and 
External/Redirect Ports will be filled after the selection. 
Protocol: It is the supported protocol for the virtual server. In addition to specifying the port 
number to be used, you will also need to specify the protocol used. The protocol used is 
determined by the particular application. Most applications will use TCP or UDP; 
Global IP: Define a public/ WAN IP address for this Application to use. This Global IP 
address must be defined in the Global IP Address. 
External Port: The Port number on the Remote/WAN side used when accessing the virtual 
server. 
Redirect Port: The Port number used by the Local server in the LAN network.